Coatings International

Information Request Form

The form below is intended as a tool for trade professionals.
We encourage persons outside the construction and maintenance industries to forward information on our site to their contractor, builder, or architect.
Not all questions may be relevant to your application but please try to answer each to the best of your ability.
We respect our customer's privacy. The information provided here will be used to ascertain your coating needs only. It will not be sold or passed to anyone not directly involved in the decision process

1. Product of Interest

Anti-grafitti
Elastomeric Architectural
Roofing
Stain - Concrete or Masonry
Stain - Wood
Application tools and sundry items
Waterproofing
Other

2. Substrate to be coated

3. Current condition of substrate

Temporary wax, oil or grease coating
No paint or coating
Intact but needs renewing
Failure in present coating
Failure in small areas
Other

4. Location of surface to be coated

Interior
Exterior
Other

5. Height of structure to be surfaced is

less than 50 ft / 15 m high
more than 50 ft / 15 m high
Intricate
Not Applicable

6. Maximum temperature coating will be exposed to

up to 150°F/65°C
up to 200°F/95°C
up to 250°F/120°C
up to 350°F/175°C

7. Surface is exposed to condensation

Continuously in use
Frequently
Occasionally
Rarely

8. Is the surface exposed to concentrated chemical fumes and vapor generated by a local process?

9. What type of sunlight exposure is typical?

Temperate Sunshine
Subtropical Sunshine
Tropical Sunshine
N/A (Inside)

10. How often is the surface washed?

Continuously wet when in use
Frequently
Occasionally
Rarely

11. Is the surface abraded?

Mild Abrasion
Moderate Abrasion
Severe Abrasion
Rarely

12. The surface:

does not contact food or potable water
has incidental contact with food or potable water
has direct contact with food or potable water

13. The coating system needs:

to be treatable to enhance inhibition of mold and mildew
no special properties for special treatment

14. The minimum ambient temperature in the field during the curing of the coating is:

at or above 55°F / 13°C
32 to 55°F / 0 to 13°C
0 to 32°F / -18 to 0°C
below 0°F / -18°C

15. Generally, the normal relative humidity in the field during the curing of the coating is:

below 15%
15 to 40%
35 to 85%
above 85%

16. What type of ventilation is available during the coating process?

forced ventilation or outdoor
indoor with normal building ventilation
confined spaces with poor ventilation such as tanks or pits

17. Additional Information

Add anything you want here. No detail is considered trivial and no question is unimportant. Please be thorough — there is plenty of room!

Personal Information

All your effort will be lost if we can't contact you.
Required fields are in bold with an asterisk*.

First Name*

Last Name*

Title

Organization*

Address*

City*

State/Province*

Zip/Postal Code*

Country*

Email*

Phone*

Reset Form