Metal, Stucco, Wood, And most other building materials
|COLOR:||White, can be tinted.|
|WEIGHT PER GALLON:||12.0 pounds / gallon|
|VOC (EPA method 24):||Compliant|
|SHELF LIFE:||12 months unopened|
|DEGREE OF TEXTURE:||Very Bold|
|PARTICLE SIZE:||1.5 - 6.0 mm|
|RECOMMENDED SPREADING RATE PER COAT:||100 square feet / gallon|
Drying Schedule: At 8 mils wet & 50% Relative Humidity:
|To Touch||90 min.||30 min.||15 min.|
|To Recoat||1 day||6 hours||4 hours|
|To Cure||30 days||15 days||10 days|
Drying time is temperature, humidity, and film thickness dependent. DO NOT apply when the dew point is less than 5° F above ambient temperature.
Clean spills and spatters immediately with water
Clean hands and tools immediately after use with soapy water.
After cleaning, flush spray equipment with water followed by mineral spirits. Leave mineral spirits in the line to prevent rusting.
INSTALLERS must read and understand all technical and informational
literature for Tough Stuff AC5300, including the Material
Safety Data Sheets, prior to using this product.
For chemical emergencies, spills, leaks, exposure, or accidents
in the U.S.: CALL CHEMTREC 24 HOURS A DAY / 365 DAYS A YEAR 1-800-424-9300.
|5 gallon cans||60 lbs.||55|
|55 gallon drum||660 lbs.||55|
DOT Shipping Information:
Health 1, Flammability 0, Reactivity 0, Protection B
Published technical data and instructions are subject to change without notice. Please contact your Coatings International Roofing Systems representative for the most current information.
Revised November 2003
Important: The information in this MSDS was obtained from sources which we believe are reliable.
HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY WARRANTY, EXPRESSED, OR IMPLIED, REGARDING
The conditions or methods of handling, storage, use and disposal of the product are beyond our control, and may be beyond our knowledge. FOR THIS AND OTHER REASONS, WE DO NOT ASSUME RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE, OR EXPENSE ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE HANDLING, STORAGE, USE, OR DISPOSAL OF THE PRODUCT.
This MSDS was prepared and is to be used only for this product. If apprised of changes, updated MSDS sheets will be promptly issued. Users must make their own determination regarding the suitability of the product for their own purpose prior to use.
VIEW / DOWNLOAD a printable PDF version of this document.
Components - Chemical Name & Common Names(Hazardous Components 1% or greater: Carcinogens 0.1% or greater)
|CHEMICAL NAME (COMMON NAME)||CAS #||%||OSHA PEL (PPM)||ACGIH TLV (PPM)||OTHER LIMITS RECOMMENDED|
|Residual Monomers||0.2 max||N/A|
|1) BOILING POINT||
212°F / 100°C
|2) SPECIFIC GRAVITY||(Water = 1) 1.2|
|3) VAPOR PRESSURE||(mm Hg at 20°C/68°F): 17|
|4) MELTING POINT||0°C / 32°F|
|5) VAPOR DENSITY||(air = 1) > 1 (heavier than air)|
|6) EVAPORATION RATE||< 1 / Slower than Ether|
|7) SOLUBILITY IN WATER||Dilutable|
|8) WATER REACTIVE||N/A|
|9) APPEARANCE & ODOR||White liquid; slight ammoniacal odor; pil 9.5 - 10.0|
LEL: N/A UEL: N/A
Product will not burn but may splatter if temperature exceeds boiling point. Polymer films are capable of burning giving off oxides or carbon/nitrogen.
Will not occur
INHALATION: Adverse health effects from vapors or spray mists in poorly ventilated areas may include irritation of the mucous membranes of the nose, throat and respiratory tract and symptoms of headache and nausea.
SKIN CONTACT: Prolonged or repeated contact with the product may cause skin irritation.
EYE CONTACT: Direct contact may product eye irritation.
Seek medical assistance for further treatment, observation and support if necessary.
Promptly & thoroughly wash eyes with water for at least 15 minutes and consult physician if irritation persists; wash skin thoroughly with soap and water; if drenched, remove & wash clothing before reuse.
Wash skin thoroughly with soap & water; if drenched, remove & wash clothing before reuse.
Move subject to fresh air.
If victim is conscious, give 2 glasses water. Call physician immediately. Do not give anything by mouth to an unconscious person.
None required if good ventilation is maintained. Otherwise wear MESA/NIOSH approved respirator suitable for vapor or mist concentrations encountered.
Additional local exhaust is recommended where vapors, mist, or aerosols may be released.
Coagulate the emulsion with ferric chloride or sulfate and then lime to a clear end point. Decant the clear liquid to sewer and landfill in coagulum. Incineration of the entire emulsion is possible but impractical because of the high water content. Coagulum may be incinerated.
Avoid storage above 100°F. Keep from freezing.
Minimum: 1.1° C/34° F Maximum: 60° C / 140° F
Avoid prolonged or repeated skin contact. Avoid inhalation of heated vapors or spray mists.
Revised January 2004