Ends the Tear Off and Replacement Cycle
by protecting and reinforcing the existing system. Both systems work together for maximum performance. The existing dry insulation is also saved.
Phased-In Applications: The Tough Stuff system can be applied over several years in phases starting with the seams while still receiving a waterproofing warranty. Warranties are piggybacked as the system is completed. This lowers cash outlay to an average of thirty percent over other options or allows for three times the waterproofing with the same dollars.
Cuts Life Cycle Costs to One Fifth that of BUR: New system is renewed by applying a simple top coat at less than one fifth the cost of total replacement. Renewal can cost less than the original, even after ten years.
Cost Effective: Costs are comparable to any good roof. Low labor requirements balance the cost of materials versus high labor / low material expense systems. The net effect is more roof for the dollar.
Deductible as Maintenance: Application is considered maintenance under building codes for the first year tax deduction close to thirty percent. Maintenance category also may eliminate the tear off requirement.
Suitable for Heavy Industry: Unaffected by grease or other common industrial chemicals. Will withstand moderate traffic without additional protection.
Cuts Cooling Costs: Cool roof technology will save 22 - 67% of cooling energy costs associated with hot weather.
Nondestructive: The application bonds to the existing matrix for a combined strength unequalled by either system alone. The customer retains full value of the existing roof.
All Tough Stuff products comply with all U.S. federal and state VOC requirements for roof coatings.
Coatings International Roofing Systems offers warranties from five to fifteen years depending on the system specified when applied by a certified contractor or maintenance personnel that have had training from Coatings International. Warranties can be extended indefinitely by reapplying the system.